flexman ETCR1000C Non Contact Phase Sequence Tester, AC 70~1000V clamp Type Non Contact Magnetic Base Phase Meter with 0.6m Leads

Specification:Model ETCR1000CFunctions Phase detection (Positive phase, reverse phase and phaseloss), Live wire examination, Simple Power detection, Breakpoint location and Line maintenance. Power Supply DC 3V2*AA Alkaline dry battery , Continuously working for 70 hoursAC Voltage Range(V) AC 70 - 1000V, 40/65Hz (Sine Waves Continuous Input)Clamp Wire Size External Diameter 1.6-16mmLED Display (Positive Phase Sequence) The four phase-sequence lamps light in order (clockwise). (Negative Phase Sequence) The four phase-sequence lamps light in order (counterclockwise). (Live Power)L1,L2,L3 lamp light up in the voltage setting range. (Phase Loss) L1 or L2 or L3 does not light. (Short Circuit)L1 or L2 or L3 does not light.Buzzing (Positive phase) The instrument emits intermittent short beeps; (Reverse phase) The instrument emits a continuous long beep.Power On Indication Power on indication light turns on; Low power, low battery light onMagnetic force Four magnets on the back of the meter, which are attached to the distribution box and can withstand 800g quality.Auto Power off After 5 minutes, the meter automatically cut off power supply.Meter Dimension Width, height, thickness 70mm*75mm*30mmClamp Leads Length 0.6mWeight 317gWorking Temperature and Humidity -10℃-55℃; below 80%rhStorage Temperature and Humidity -20℃-60℃; below 90%rhMaximum Measured Voltage AC 1000VDielectric Strength 5.4kVrmsMaximum rated Power 100mVASafety Provisions EN61010-1: 2001, EN61010-031: 2002, Pollution level 2, CAT 3 (600V), Transient over-voltage 6000VPackage list:1 * Non-Contact Phase Sequence Detector1 * User ManualNote:The actual product color may deviate from the photo due to light.There may be a slight deviation in the measurement of product.

• [PHASE SEQUENCE DETECTION] Quickly determine the positive or negative phase sequence of a three-phase power supply with dynamic sound and light indicators.
• [LIVE LINE CHECK] Ensure safe and reliable live wire identification without the need to open or touch the high-voltage wires.
• [SIMPLE POWER CHECK] Easily perform basic power checks and spot wire break positions for efficient troubleshooting.
• [NON-CONTACT INDUCTIVE MEASUREMENT] Utilize clamp-type inductive technology for fast and safe productivity without direct contact with live wires.
• [MAGNETIC BASE DESIGN] Conveniently attach the detector to metal casings during testing with 4 built-in magnets for ease of operation.